Maxxis Minion DHR II TR EXO MaxxTerra MTB Folding Tyre

The MAXXIS Minion DHR II has been a renowned tyre in the gravity sector for many years and is designed for versatile use on trails, enduro rides and in bike parks. The supported side knobs offer high lateral support in aggressive bends, while transverse centre knobs are designed for maximum braking traction.

The open tread pattern is designed for dry and loose surfaces as well as technical trails and is intended to provide predictable riding behaviour even in changing conditions. Depending on the bike set-up, the Minion DHR II is suitable both as a rear tyre with high braking traction and as a front tyre for aggressive trail and gravity use.

In this version, the Minion DHR II combines the lightweight EXO Protection with the further developed MaxxTerra rubber compound for trail and all-mountain use. The protective layer increases the cut and abrasion resistance of the sidewall without unnecessarily compromising performance, while the compound offers high grip, efficient rolling behaviour and optimised mileage.


Technologies:

• EXO PROTECTION
EXO Protection is an extremely cut- and abrasion-resistant protective layer on the sidewall of selected MTB, Gravel and Metro tyres from MAXXIS. The tightly woven material is designed to be both light and flexible, so that the performance of the tyres is affected as little as possible.

• MaxxTerra
MaxxTerra is a single-compound rubber compound from MAXXIS for trail and enduro use. The consistent development of the proven 3C MaxxTerra compound is intended to offer more grip and a longer tread life while maintaining low rolling resistance. The compound thus combines efficient rolling behaviour with high traction on the trail.

• TUBELESS READY [TR]
In the MAXXIS range, Tubeless Ready [TR] refers to tyres with a construction that is designed for tubeless use with a sealant, a compatible tubeless rim or matching rim tape. The system enables lower air pressures and is intended to improve traction and ride quality, while reducing the rolling resistance. In addition, minor damages can be sealed directly by the sealant, which reduces the risk of breakdowns.

Technical details:
• Intended use: Trail, All-Mountain
• Tyre type: clincher (folding tyre)
• Reflective stripes: No
• Tubeless capability: TR (tubeless ready)
• Puncture protection: EXO PROTECTION
• Rubber compound: MaxxTerra dimensions:

ETRTO / Inch Size / French size / Weight** / Tyre pressure / Casing / Maximum load / E-bike approval*:
61-559 / 26 x 2.40“ / ---- / approx. 950 g / max. 3.4 bar (49 psi) / 60 TPI / 90 kg / E25
61-584 / 27.5 x 2.40“ / ---- / approx. 990 g / max. 3.4 bar (49 psi) / 60 TPI / 90 kg / E25
66-584 / 27.5 x 2.60“ / ---- / approx. 995 g / max. 2.8 bar (41 psi) / 120 TPI / 90 kg / E25
61-622 / 29 x 2.40“ / ---- / approx. 1065 g / max. 3.4 bar (49 psi) / 60 TPI / 90 kg / E25
66-622 / 29 x 2.60“ / ---- / approx. 1075 g / max. 2.8 bar (41 psi) / 120 TPI / 90 kg / E25
*Note:
E-bike approval “no” = no e-bike approval.
E-bike approval "E-25" = approval for pedelecs up to 25 km/h pedal assistance.
E-bike approval "E-50" = approval for S-pedelecs and e-bikes up to 50 km/h subject to compulsory insurance (ECE-R75).
**Attention:
The actual weights may vary depending on the colour variant.


In the box:
• 1 MAXXIS Minion DHR II TR EXO MaxxTerra MTB folding tyre

Note: Illustration shows 3C MaxxTerra version.

Manufacturer: Cheng Shin Rubber Ind. Co. Ltd, Suite 800, 8F, 50, Sec.1,Shin-Sheng S.Rd, 100 Taipei, Taiwan, www.maxxis.com
Responsible person: Maxxis Europe B.V., Neutronenlaan 7, 5405 NG Uden, Netherlands, maxxis-europe.com