innobike 202 Disc Cleaner Brake Cleaner Fast-Acting Degreaser

The 202 DISC CLEANER by Innobike impressively shows that a good brake cleaner can do more than removing dirt from brake discs without leaving any residue. The tried and tested industrial product also proves its cleaning power as a fast-acting degreaser for chains, sprockets and shifting system. Even stubborn incrustations on chainstays and rims are gently removed. The powerful spray jet can be used generously or aimed at specific points.

The formula of isopropyl alcohol, acetone and special petrol leaves no chance for dirt, grease, oils or resins. Moisture is displaced and an absolutely clean surface remains. As Innobike brake cleaner evaporates quickly, it leaves no residue after wiping off and no subsequent treatment is necessary. Depending on the area of application, the cleaned parts should then be protected against corrosion or lubricated.

Details:
• Intensive cleaner for brake and drivetrain
• Dissolves oil, grease and resin quickly and reliably
• Four-fold formula for powerful and efficient use
• For cleaning without water
• For all metal surfaces, such as steel, aluminium or titanium
• Corrosion protection during use (pH value 7)
• Spray jet cleans the surface evenly or can be aimed at specific points
• Low consumption thanks to economical dosage
• Displaces moisture
• Evaporates without residue
• Prevents brake squealing
• Contents: 500 ml spray can

In the box:
• 1 innobike 202 DISC CLEANER brake cleaner

Directions for use:
If the bike is very dirty, clean it roughly first and rinse it with water. Check the material compatibility of sensitive surfaces in a concealed area. Apply Innobike 202 Brake Cleaner generously if necessary or spray it on specific areas to be cleaned. Remove dissolved dirt with a cloth. Done!
After cleaning, relubricate chain and shifting system e.g. with innobike 105 HIGH TECH CHAIN FLUID (prod. code 1310922) or 106 CHAIN FLUID PLUS (prod. code 2331815).

Attention!
The special cleaner consists of a solvent mixture. Avoid excessive use on rubber and paint. Check for suitability in a concealed area, especially prior to use on plastics.


Hazard and precautionary statements:
Extremely flammable aerosol. Pressurised container. May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life, with long lasting effects. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment. Dispose of contents/container in accordance with local, regional regulations.