Milkit · Tubeless Sealant
- tól4,95 EUR
66,00 EUR / l Normal price
- 6,95 EUR RRP
Milkit · Tubeless Sealant
66,00 EUR / l Normal price
Continental · RevoSealant sealant
82,50 EUR / l Normal price
Schwalbe · Doc Blue Professional Sealant / Tyre Sealant
82,50 EUR / l Normal price
MaXalami · Sausage Water Hi-Fibre Tire Sealant
37,80 EUR / l Normal price
12,95 EUR last lowest price*: -27 %
Milkit · Road & Gravel Tubeless Sealant
66,00 EUR / l Normal price
9,95 EUR last lowest price*: -50 %
Dynamic · Bartender Tubeless Sealant
69,50 EUR / l Normal price
6,95 EUR last lowest price*: +0 %
MaXalami · Wurstwasser 4tube Inner Tube Sealant
39,80 EUR / l Normal price
DT Swiss · High Pressure Tubeless Sealant
141,50 EUR / l Normal price
Depending on their composition, tubeless sealants mostly differ in terms of:
Some manufacturers add more fillers to seal larger holes or cuts. Accordingly, the sealant may tend to form lumps or dry out more quickly. The temperature range is usually indicated on the packaging, but this only becomes important in winter when temperatures are well below freezing. Many manufacturers also rely on environmentally friendly formulas and do not add ammonia, for example.
You can fill your tubeless tyre with sealant in different ways:
The first method is particularly suitable for the initial filling of the tyre. It is faster and you can also use a measuring cup instead of a syringe. However, you should have some practice fitting the tyre to avoid spilling. The second method is also suitable for refilling sealant. There is, however, a greater risk of a sticking valve due to inaccurate work.
The service life of the tubeless sealant depends on various factors, such as the frequency and intensity of use and the environment in which the bike is ridden. If you use your bike often and in different conditions, the sealant can dry out or clump more quickly. Most manufacturers therefore specify a shelf life of between two and six months. At the latest when holes are no longer sealed or the tyre loses air faster than usual, a change is due. In principle, however, you should not wait longer than 6 months to change the sealant to ensure optimum sealing capability.
The optimum amount of sealant depends on the size of the tubeless tyre. In most cases, 50-100 ml of sealant is sufficient for one tyre. The following figures refer to 28 inch or 29 inch tyres and can be used as a rough guide for most manufacturers:
Some manufacturers also deviate significantly from these values. You will usually find precise instructions on the packaging. Also note that in addition to the tyre width, the wheel size also plays a role, especially with mountain bike tyres.