XR 1700 Spline® 25 SHIMANO MICRO SPLINE Disc BOOST 29" MTB Rear Wheel

Abstract SKU
Abstract Product Id
Concrete Product Id
XR 1700 Spline® 25 SHIMANO MICRO SPLINE Disc BOOST 29" MTB Rear Wheel
XR 1700 Spline® 25 SHIMANO MICRO SPLINE Disc BOOST 29" MTB Rear Wheel

DT Swiss XR 1700 Spline® 25 SHIMANO MICRO SPLINE Disc BOOST 29" MTB Rear Wheel

343,95 EUR Ajánlott fogyasztói ár 483,90 EUR

Bruttó ár Hozzáadás 2,95 EUR (szállítás Magyarország)

Cikkszám: 231403301

Szín schwarz


Szállítási idő, 1 hét

Store availability


High-quality materials and a low weight for lively acceleration!
The DT Swiss XR 1700 Spline® 25 system wheel was developed to meet the high demands of modern cross-country riders.

If cross-country means more to you than some laps after work and the occasional marathon, then the XR 1700 rear wheel is made for you. The lightweight, welded aluminium rim with an internal width of 25 mm, the reliable Ratchet SL freewheel system, the build quality of the high-quality DT Swiss 350 Spline® hub and the robust competition® spokes testify to the Swiss precision.

The XR 1700 Spline® 25 is a wheel that you can rely on every day of the week - whether you're racing against yourself, your mates or the competition.


With the Ratchet SL freewheel system from DT Swiss, the designation "SL" (Super Light) means that the ratchets are lighter than those of the classic DT Ratchet System, thanks to additional machining. Depending on the equipment, the ratchets of the Ratchet System hubs have an engagement angle between 6.7° and 20°. The system stands out for high reliability thanks to the simultaneous meshing of the teeth, which leads to significantly lower point loads. The no-tool concept allows easy maintenance and tool-free conversion to common axle and freehub body standards.

All DT Swiss wheels are tubeless ready. The profiles of the DT Swiss rims are specially designed for tubeless use. The rim profile makes it easier to fit the right tyre and ensures a perfect fit. The tubeless system of the rim consists of DT Swiss Tubeless Ready Tape for sealing and a DT Swiss tubeless valve in a length that complies with the rim. When using tubeless ready tyres, it is mandatory to use a compatible sealant. However, it is also possible to use a conventional combination of tyre and inner tube.

Having learned from years of experience, DT Swiss only uses durable cartridge bearings without bearing play adjustment. DT Swiss hubs are designed to have the optimum axial and radial bearing play when they are properly installed. The correct preload of the bearings to compensate for the clamping force of the wheel mounting system is the basis for a play-free hub with minimum friction.

DT Pro Lock® prevents the spoke-nipple connection from loosening. In the Pro Lock® process, a special dual component adhesive is injected into the nipple thread, allowing for extremely durable wheel builds. By threading the nipple onto the spoke the adhesive is activated and then hardens completely within a few hours. Re-truing the wheel is possible, yet it will cause a slight decrease in the adhesive power each time.

• PHR:
The PHR system (Pro Head Reinforcement) increases the load-bearing surface of the nipples on the rim and thus reduces localized stress. Load peaks are reduced, which allows DT Swiss to install lighter rims. The shape of the PHR washers also acts as a ball joint and automatically aligns the specific DT Squorx Pro Head ball nipples with the spoke, reducing the risk of spoke breakage or rim cracking.

Technical details:

• Wheel size: 29"
• Rim material: aluminium
• Rim type: clincher
• Brake type: disc brake
• Rim depth: 19.5 mm
• Rim width: 29 mm
• Inner rim width: 25 mm
• ETRTO: 25 - 622
• For Presta valve (Ø 6.5 mm)
• Tubeless ready
• Suitable for tyre widths: 1.5" - 3.0"

Spokes and nipples:
• Spoke type: DT Swiss competition® straightpull
• Number of spokes: 28 pieces
• Lacing: 3-cross
• Nipples: DT Swiss ProLock® Squorx ProHead alu

Rear hub:
• 350, Spline®, 4 sealed cartridge bearings
• For disc brakes
• Aluminium freewheel and aluminium hub body
• CenterLock brake rotor mount (IS 6-bolt with adapter, e.g. product code: 2283716)
• Ratchet SL freewheel system, 36T (10° degree engagement)
• Front hub spacing: 12 x 148 mm (BOOST thru axle)

Cassette compatibility:
• SHIMANO 12-speed MICRO SPLINE MTB cassettes (& SHIMANO 11-speed WIDE FLANGE MICRO SPLINE MTB cassettes)

• Weight: approx. 889 g
• ASTM classification: 3 (for rough off-road riding and jumps up to 24 in./61 cm)
• Max. system weight: 110 kg (cyclist, bike, gear and luggage)

In the box:
• 1 DT Swiss XR 1700 Spline® 25 BOOST rear wheel SHIMANO MICRO SPLINE
• 1 DT Swiss Tubeless-Ready Tape (rim tape, pre-mounted)
• 1 DT Swiss tubeless valve

Material: carbon:
Tubeless ready:
Freehub body:
Shimano Microspline
Manufacturer`s ref.:
12 x 148 mm

Reviews in our webshop are checked for authenticity. To ensure that the reviews have been written by customers, only logged-in customers can write reviews. Reviews can only be submitted by logged-in customers who have purchased the product being reviewed, which is automatically checked against the customer's order history.